產品詳情
原裝貨源渠道，歐美一手供應SAUTER溫濕度開關HBC111F001
通過控制風扇，干燥單元和空氣加濕器對相對濕度的監視和調節?溫度補償的濕度傳感器?基于％RH的印刷量表的可變相對濕度作為設定點的可變相對濕度?包括用密封或壁壁安裝的固定支架?用于在墻壁上或墻壁上安裝?與單桿更換式接觸型和固定固定的固定切換量?XSD?XSD?XSD差異為13桿?XSD?XSD較高13秒?XSD?XSD差異為15秒?XSD較高13秒。包括固定支架
Monitoring and regulation of relative humidity by controlling fans, drying units and air humidifiers
? Temperature-compensated humidity sensor
? Variable relative humidity as setpoint based on printed scale in % rh
? Includes fixing bracket with seal for duct or wall mounting
? For fitting in a ventilation duct or on a wall
? With single-pole change-over contacts and fixed switching difference Xsd
? Immersion depth 130...156 mm; includes fixing bracket
電源最大負載5（3）A，250 v?min。負載100 mA，24 V參數設置范圍15 ... 95％RH設置精度±5％RH濕度校準在55％RH，23°C溫度影響賠償的長期穩定性–1.5％rh/a在移動空氣中的時間常數（0.2 m/s）。 3分鐘開關差XSD XSD 4％RH（濕度校準后）最大?？账?0 m/s
Power supply
Max. load 5(3) A, 250 V~
Min. load 100 mA, 24 V
Parameters
Setting range 15...95% rh
Setting accuracy ±5% rh
Humidity calibration at 55% rh, 23 °C
Temperature influence Compensated
Long-term stability –1.5% rh/a
Time constant in moving air (0.2 m/s) Approx. 3 minutes
Switching difference Xsd 4% rh (after humidity calibration)
Max. air speed 10 m/s
